Gamma+ Blade Compatibility Guide

Gamma+ Blade Compatibility Guide

Choose a replacement blade, cutter or foil by exact tool model and SKU. Colour and coating are useful descriptions, but they do not prove compatibility.

Fixed blade, moving cutter and foil are different parts

  • The fixed blade sets the outer profile, width and skin clearance.
  • The moving cutter travels behind the fixed blade and feeds hair through the teeth.
  • A foil and cutter set belongs to a particular shaver platform and should be replaced as the stated compatible system.

Understand the cutting profiles

  • X-Pro Wide: a wider trimmer profile for visible line work and broad contact.
  • Classic: a familiar trimmer profile for outlining and finishing.
  • Faper: a clipper profile combining fade and taper characteristics.
  • Fade: intended for close fade work and flatter cutting angles.
  • Taper: versatile blending and general clipper work.
  • Deep tooth / shallow tooth: moving-cutter geometry that changes how hair feeds through the cutting set.

Compare exact replacement sets

Seven checks before ordering

  1. Record the model and SKU printed on the tool or package.
  2. Confirm whether you need a fixed blade, moving cutter, matched blade set, foil or internal service part.
  3. Match the replacement SKU—not only the finish or colour.
  4. Confirm the stated platform and mounting pattern on the product page or manual.
  5. Disconnect the tool before removing the old cutting system.
  6. Keep the moving cutter safely behind the fixed blade edge and test clearance before skin contact.
  7. Brush away debris and oil the cutting surfaces according to the manufacturer instructions.

If the part is an internal motor, battery, wiring assembly or housing, use a qualified service technician. Return to the Gamma+ Professional Tool Buying Guide, read the Barber Station Setup Guide, or shop Gamma+ blades and service parts.

Previous Next
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.